What are the working principles and advantages of basalt

Basalt has a bulk density of 2.8 to 3.3 g/cm3 and a high compressive strength of up to 300 MPa. General sand making equipment cannot process basalt into available gravel material. In this regard, experts combined the previous production experience, physico chemical properties of basalt, foreign advanced cases and other circumstances, developed a new generation of basalt sand exclusive equipment - basalt sand making machine. The equipment has an operating cycle of up to 18 hours, high-efficiency, energy-saving, high-quality finished sandstone, and easy operation.Sand Making Machines | Machinery Sand Breakers The material falls directly from the upper part of the machine into a high-speed rotating turntable. Under the action of high-speed centrifugal force, the other part of the target stone diverted around the turntable in an umbrella manner produces high-velocity impact and high-density comminution. After basalt hit each other, Will create a swirling motion between the turntable and the casing and cause multiple blows to each other, friction, smash, material screening control through the screening equipment to achieve the required particle size. From the bottom of the fuselage - discharge outlet.

Basalt sand making machine The advantages of basalt sand making machine:
1, the structure is simple, strong crushing Using advanced crushing technology and digital processing equipment, the internal structure is precise and the crushing capacity is enhanced.
2, low noise, less dust Strictly meet the national environmental protection standards, low noise, dust removal equipment, reduce dust production, reduce pollution.
3, convenient operation and maintenance The equipment is easy to use during operation, and maintenance work is quick and easy, reducing downtime and maintenance time
.4, high production efficiency There is no dead zone in the deep cavity crushing, no blocking phenomenon, single machine energy saving 15% to 30%, system energy saving more than doubled.
5, pressure wear The parts are made of high-quality materials, which are made of steel castings. The eccentric shafts are made of forged billets to enhance the compression resistance and wear resistance.6, widely used The discharge outlet has a wide range of adjustments, a reasonable structure, and a small footprint, which can satisfy a variety of user processing needs.